Creative Electron
read . discuss . shop
PIC: PC Interfaced Digital Thermometer using PIC Microcontroller
A very comprehensive tutorial explaining each and every step for making a digital thermometer. PIC16F876 is used along with LM35 temperature sensor. After reading and converting the values into temperature in Celsius, it is sent to PC over RS232. Continue reading
XBee: Making your first application – 2
The post explains step-by-step how to setup XBee modules with PC. It uses X-CTU for configuration of the modules. The posts also helps in testing the communication and range of the modules. If you are new to XBee than this is a very useful post. Continue reading
PIC:Introduction to PIC with simulation in Proteus.
This tutorial is specially written for newbies to PIC. The article introduces CCS C Compiler and use of Proteus for simulation. It helps you to develop a simple program to flash a LED. Then, the steps for simulation are also provided for Proteus. In the end, two best Ebooks are referred for programming and simulation PIC. Continue reading
AVR: Introduction to AVR through a simple program.
AVR are RISC based microcontroller made by ATMEL. This post introduces AVR by the help of a simple program which toggles a LED. It is achieved by the help of WinAVR and ATMEL AVR-Studio. ATMEGA8 is used and is programmed in C Language. Continue reading
XBee: Making your first application – 1
After brief introduction to XBee, come the real practical and interesting part. Running a XBee has two options; whether you make your own board for development or buy one from SparkFun. Continue reading
AVR: How to use serial port in ATMEGA88
So far we have learned to read digital inputs, analog inputs and use interrupts in ATMEGA8. In this article we will be learning a very important and useful feature if the microcontroller. After reading the article you will be able to send data over the serial port of the controller, to either PC or any RS232 device. Continue reading
XBee: Making your first application – 2
The post explains step-by-step how to setup XBee modules with PC. It uses X-CTU for configuration of the modules. The posts also helps in testing the communication and range of the modules. If you are new to XBee than this is a very useful post. Continue reading
Popular Posts
PIC: PC Interfaced Digital Thermometer using PIC Microcontroller28
Project: Baking Plant - Temperature Control and Monitoring16
GLCD: Interfacing 128x64 Pixel GLCD (KS0108) with PIC16F87614
ARDU: Physical Computing with Arduino - An Introduction14
Project: Car Racing Timer Based on PIC Microcontroller.10
